VR1® Arm Curl - CableOwner’s ManualStrength SystemsPart Number 13070-999-4 G www.cybexintl.com
Cybex Owner’s Manual 10If ThenIf machine needs weight stacks removed before moving to desired location.4. Remove guide rod caps. Guide rod cap contai
Cybex Owner’s Manual 11SecurelyanchormachinetotheoorCybex strongly recommends to maximize stability, equipment must be secured to a solid level
Cybex Owner’s Manual 123. Place weight stack pin in each plate to verify proper installation.4. Lift top weight up and down simulating normal operat
13Cybex Owner’s ManualExerciseIntended UseThe intended commercial use of this machine is to aid exercise and improve general physical tness.Instruct
14Cybex Owner’s ManualMaintenanceAll preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenanc
15Cybex Owner’s ManualClean UpholsteryIf ThenLight Soiling1. Prepare a solution of 10% household liquid soap and warm water. 2. Apply with a soft d
16Cybex Owner’s ManualGuidelines for cleaning front panel: Use clean soft cloths or sponges for application of cleaners and again for washing and rin
17Cybex Owner’s Manual WARNING: Equipment hazard. To avoid serious injury or death replace worn or damaged components immediately and keep the equip
18Cybex Owner’s ManualBeltsCondition of Belt 3D View 3D or Side ViewPeeling of the belt’s skin.Wave in beltBelt is necked down (narrow section) Repl
19Cybex Owner’s Manual CAUTION: Worn handles• Do not use handles if less then 1/8” of material remains on edge.• Replace all worn handles immediat
Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. VR1® and its mark are registered trademarks of Cybex International, I
20Cybex Owner’s ManualCable AdjustmentTools Required9/16” Wrench (2) Four types of cable tension adjustment are used on Cybex Strength Systems:Cable
21Cybex Owner’s ManualBelt AdjustmentTools Required• 7/32” Wrench• Torque wrench (lbs-in)Belt Adjustment ActionLoose Belt1. Using a 7/32” Allen wr
22Cybex Owner’s ManualCustomer ServiceProduct RegistrationTo register product do the following:1. Visit www.cybexintl.com.2. Locate Product Registr
23Cybex Owner’s ManualReturn Material Authorization (RMA)The Return Material Authorization (RMA) system is used when returning material for placement
10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexintl.com
Cybex Owner’s Manual 3SafetySafety Guidelines and PracticesRead the Owner’s Manual carefully before assembling, servicing, or using the equipment. Own
Cybex Owner’s Manual 4It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance around each
Cybex Owner’s Manual 5• DO NOT lean or pull on machine• DO NOT use machine for support during stretching.• DO NOT attach resistance straps, ropes
6Cybex Owner’s ManualWarnings and CautionsWarning decals indicate a potentially hazardous situation that could result in death or serious injury if t
7Cybex Owner’s ManualLabel PlacementDE000001-X4520-362-XDE000005-X
Cybex Owner’s Manual 8AssemblyMachine SpecificationsTotal Weight and Size VR1 Arm Curl - Cable 17070 Standard StackWeight Machine Dimensions at Rest M
Cybex Owner’s Manual 9114800-55713000-552Decal, Weight Plate (10-150) (Light)Decal, Weight Plate (10-220) (Standard)1251:1OWATONNAMFG. APPR.TECH. PUBS
Comments to this Manuals