Cybex 20060 Eagle NX Seated Leg Curl User Manual

Cybex Eagle® NX Seated Leg Curl Owner’s ManualStrength SystemsPart Number 20060-999-4 C www.cybexintl.com

Cybex Owner’s Manual 10Verify parts list shown belowQty Part Number Description Diagram2 20000-339 Foot Pad2 20000-376 Foot Pad2 20000-377 Foot Pad1 2

Cybex Owner’s Manual 112. Remove ten screws securing top covers (front and back) to frame using a Phillips screwdriver.124231Description1 10-32 screw

Cybex Owner’s Manual 123. Remove BHSCS and pulley shaft bolts securing lower pulley assembly to pulley bracket using two 5/16” Allen wrenches.2341Des

Cybex Owner’s Manual 13Separate Frame1. Remove six bolts and three connectors securing two halves of the frame using a 7/32” Allen wrench.12Descripti

Cybex Owner’s Manual 144. Install each weight plate, one at a time, so wide edge of bushing faces upward and narrow edge of bushing faces downward.NA

Cybex Owner’s Manual 155. Remove front sheet, do not peel decals off of weight plates.21Description1 Weight stack selector pin2 Weight plate decal6.

Cybex Owner’s Manual 164. Squeeze sides of top weight cover together and lift up. Pull down on cable until it is tight. Install spiral pin connecting

17Cybex Owner’s Manual ExerciseIntended UseThe intended commercial use of this machine is to aid exercise and improve general physical tness.Instr

18Cybex Owner’s ManualMaintenanceAll preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenanc

19Cybex Owner’s ManualClean UpholsteryIf ThenLight Soiling1. Prepare a solution of 10% household liquid soap and warm water. 2. Apply with a soft d

Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. Eagle® and its mark are registered trademarks of Cybex International,

20Cybex Owner’s ManualGuidelines for cleaning front panel: Use clean soft cloths or sponges for application of cleaners and again for washing and rin

21Cybex Owner’s Manual WARNING: Equipment hazard. To avoid serious injury or death replace worn or damaged components immediately and keep the equip

22Cybex Owner’s ManualBeltsCondition of Belt 3D View 3D or Side ViewPeeling of the belt’s skin.Wave in beltBelt is necked down (narrow section) Repl

23Cybex Owner’s Manual CAUTION: Worn handles• Do not use handles if less then 1/8” of material remains on edge.• Replace all worn handles immediat

24Cybex Owner’s ManualCable AdjustmentTools Required9/16” Wrench (2) Four types of cable tension adjustment are used on Cybex Strength Systems:Cable

25Cybex Owner’s ManualBelt AdjustmentTools Required• 7/32” Wrench• Torque wrench (lbs-in)Belt Adjustment ActionLoose Belt1. Using a 7/32” Allen wr

26Cybex Owner’s ManualCustomer ServiceProduct RegistrationTo register product do the following:1. Visit www.cybexintl.com.2. Locate Product Registr

27Cybex Owner’s ManualReturn Material Authorization (RMA)The Return Material Authorization (RMA) system is used when returning material for placement

Cybex Owner’s Manual 3SafetySafety Guidelines and PracticesRead the Owner’s Manual carefully before assembling, servicing, or using the equipment. Own

10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexintl.com

Cybex Owner’s Manual 4It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance around each

Cybex Owner’s Manual 5• DO NOT lean or pull on machine• DO NOT use machine for support during stretching.• DO NOT attach resistance straps, ropes

6Cybex Owner’s ManualWarnings and CautionsWarning decals indicate a potentially hazardous situation that could result in death or serious injury if t

7Cybex Owner’s ManualLabel PlacementDE000023-XDE000022-X8500-025-X

Cybex Owner’s Manual 8AssemblyMachine SpecificationsTotal Weight and Size: 20060 Eagle NX Seated Leg CurlWeight Machine Dimensions at Rest Machine Dim

Cybex Owner’s Manual 9All other machines must have a clear floor space of 23” for all access point on the machine, unless shown in the Owner’s Manual.