Cybex 18080 Bravo Pro User Manual

Cybex Bravo ProOwner’s ManualStrength SystemsPart Number 18080-999-4 Awww.cybexintl.com

10Cybex Owner’s ManualQty Part Number Description Diagram2 GQ000206 Link228800-0078800-008Handle Assembly1 51122 Strap1 18080-009 Lat Bar Assembly1 0

11Cybex Owner’s ManualMove to desired location WARNING: Remove from pallet: Serious injury or death can result if the Bravo Pro is not removed from

12Cybex Owner’s ManualAttach chin up bar (18085) or cross support bar (18080)1. Remove the two BHSCS and locknuts from the frame weldment using a 7/

13Cybex Owner’s ManualAttach back brace1. Attach back brace using a 7/32” Allen wrench and a 9/16” wrench using four BHSCS 2.50”, washers and locknu

14Cybex Owner’s ManualInstall Weight Plates1. Remove guide rod caps. Guide rod cap contains a compression spring that will y if grasp is not releas

15Cybex Owner’s ManualCable routing1. Verify cable is routed through top of pulley bracket and then route cable end to top weight connector.2. Pul

16Cybex Owner’s ManualWeight stack decals1. Choose the appropriate decal; pounds, kilograms or both.2. Peel off back cover of decal. When peeling o

17Cybex Owner’s ManualExerciseIntended UseThe intended commercial use of this machine is to aid exercise and improve general physical tness.Instruct

18Cybex Owner’s ManualLAT PULLOVERHEAD PRESSREAR DELTLATERAL RAISEARM EXTENSIONARM CURLHIP ABDUCTIONSQUAT

19Cybex Owner’s ManualHIP FLEXION-KNEE EXTENSIONHIP ADDUCTIONHIP EXTENSION-KNEE FLEXIONTRUNK FLEXIONTRUNK EXTENSIONTRUNK ROTATIONLUNGE

Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc., makes no representations or w

20Cybex Owner’s ManualMaintenanceAll preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenanc

21Cybex Owner’s ManualClean UpholsteryIf ThenLight Soiling1. Prepare a solution of 10% household liquid soap and warm water. 2. Apply with a soft d

22Cybex Owner’s ManualGuidelines for cleaning front panel: Use clean soft cloths or sponges for application of cleaners and again for washing and rin

23Cybex Owner’s Manual WARNING: Equipment hazard. To avoid serious injury or death replace worn or damaged components immediately and keep the equip

24Cybex Owner’s ManualBeltsCondition of Belt 3D View 3D or Side ViewPeeling of the belt’s skin.Wave in beltBelt is necked down (narrow section) Repl

25Cybex Owner’s Manual CAUTION: Worn handles• Do not use handles if less then 1/8” of material remains on edge.• Replace all worn handles immediat

26Cybex Owner’s ManualCable AdjustmentTools Required9/16” Wrench (2) Four types of cable tension adjustment are used on Cybex Strength Systems:Cable

27Cybex Owner’s ManualBelt AdjustmentTools Required• 7/32” Wrench• Torque wrench (lbs-in)Belt Adjustment ActionLoose Belt1. Using a 7/32” Allen wr

28Cybex Owner’s ManualCustomer ServiceProduct RegistrationTo register product do the following:1. Visit www.cybexintl.com.2. Locate Product Registr

29Cybex Owner’s ManualReturn Material Authorization (RMA)The Return Material Authorization (RMA) system is used when returning material for placement

Cybex Owner’s Manual 3SafetySafety Guidelines and PracticesRead the Owner’s Manual carefully before assembling, servicing, or using the equipment. Own

10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexintl.com

Cybex Owner’s Manual 4It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance around each

Cybex Owner’s Manual 5• DO NOT lean or pull on machine• DO NOT use machine for support during stretching.• DO NOT attach resistance straps, ropes

6Cybex Owner’s ManualWarnings and CautionsWarning decals indicate a potentially hazardous situation that could result in death or serious injury if t

7Cybex Owner’s ManualLabel PlacementDE000005-X8500-025-X8500-025-XDE0000005-X8500-025-XDE000001-X8800-442-X

8Cybex Owner’s ManualAssemblyMachine SpecificationsTotal Weight and Size 18080 Bravo ProWeight Machine Dimensions at Rest Machine Dimensions at Use13

9Cybex Owner’s ManualAll other machines must have a clear floor space of 23” for all access point on the machine, unless shown in the Owner’s Manual.