Cybex 13030-999 VR1 Row User Manual

VR1® Row/Rear DeltOwner’s ManualStrength SystemsPart Number 13030-999-4 H www.cybexintl.com

Cybex Owner’s Manual 10Do not install, use, or store the unit in an area of high humidity, such as near a steam room, sauna, indoor pool or outdoors.

Cybex Owner’s Manual 11If ThenIf machine needs weight stacks removed before moving to desired location.Two people will be required for this procedure1

Cybex Owner’s Manual 12If ThenIf machine needs weight stacks removed before moving to desired location. 5. Remove guide rod cap and springs.6.

Cybex Owner’s Manual 132. Position each weight plate so wide edges of bushings face upward and narrow edges of bushings face downward.CORRECTWide bu

14Cybex Owner’s ManualExerciseIntended UseThe intended commercial use of this machine is to aid exercise and improve general physical tness.Instruct

15Cybex Owner’s ManualMaintenanceAll preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenanc

16Cybex Owner’s ManualClean UpholsteryIf ThenLight Soiling1. Prepare a solution of 10% household liquid soap and warm water. 2. Apply with a soft d

17Cybex Owner’s ManualGuidelines for cleaning front panel: Use clean soft cloths or sponges for application of cleaners and again for washing and rin

18Cybex Owner’s Manual WARNING: Equipment hazard. To avoid serious injury or death replace worn or damaged components immediately and keep the equip

19Cybex Owner’s ManualBeltsCondition of Belt 3D View 3D or Side ViewPeeling of the belt’s skin.Wave in beltBelt is necked down (narrow section) Repl

Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc VR1® and its mark are registered trademarks of Cybex International, In

20Cybex Owner’s Manual CAUTION: Worn handles• Do not use handles if less then 1/8” of material remains on edge.• Replace all worn handles immediat

21Cybex Owner’s ManualCable AdjustmentTools Required9/16” Wrench (2) Four types of cable tension adjustment are used on Cybex Strength Systems:Cable

22Cybex Owner’s ManualBelt AdjustmentTools Required• 7/32” Wrench• Torque wrench (lbs-in)Belt Adjustment ActionLoose Belt1. Using a 7/32” Allen wr

23Cybex Owner’s ManualCustomer ServiceProduct RegistrationTo register product do the following:1. Visit www.cybexintl.com.2. Locate Product Registr

24Cybex Owner’s ManualReturn Material Authorization (RMA)The Return Material Authorization (RMA) system is used when returning material for placement

10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexintl.com

Cybex Owner’s Manual 3SafetySafety Guidelines and PracticesRead the Owner’s Manual carefully before assembling, servicing, or using the equipment. Own

Cybex Owner’s Manual 4It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance around each

Cybex Owner’s Manual 5• DO NOT lean or pull on machine• DO NOT use machine for support during stretching.• DO NOT attach resistance straps, ropes

6Cybex Owner’s ManualWarnings and CautionsWarning decals indicate a potentially hazardous situation that could result in death or serious injury if t

7Cybex Owner’s ManualLabel PlacementDE000001-X8500-025-X4520-362-XDE000005-X

Cybex Owner’s Manual 8AssemblyMachine SpecificationsTotal Weight and Size VR1 Row/Rear Delt 13030 Standard StackWeight Machine Dimensions at Rest Mach

Cybex Owner’s Manual 9In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least 30 by 48 inches and be served