CYBEX 610A Service Manual download pdf (Page 35)

Arc Trainer

425A Drive Link

Kit No. 425AK002

Installation Instructions

NOTE: This instruction sheet describes how to

replace the Drive Link in the Arc Trainer

425A.

Tools Required

• Phillips screwdriver • 3/4” Open end wrench

• 5/32” Allen wrench • 5/16” Allen wrench

1. Read and understand all instructions thoroughly

before installing this kit.

2. Verify kit contents. See Figure 1.

Figure 1

A. Drive Link, (1), 425AK002

B. Loctite, (1), YA000201

3. Disconnect the external power source.

A. Unplug the power cord from the power outlet.

! WARNING: Disconnect the power cord before

continuing this procedure. Keep wet

items away from inside parts of the

unit. Electrical shock could occur

even if the unit is unplugged.

B. Remove top cover.

6. Remove upper side cover.

A. Using a Phillips screwdriver, remove the

screw securing the upper side cover.

See Figure 4.

Figure 2

Screws

(4)

Front

Cover

Figure 3

Screw

4. Remove the front cover.

A. Using a Phillips

screwdriver, remove

the four screws

securing the front

cover. See Figure 2.

B. Remove front cover.

5. Remove top cover.

A. Using a Phillips screwdriver, remove the

screw securing the top cover. See Figure 3.

Figure 4

Locking

Connectors

Upper Left

Side Cover

Screw

B. Remove upper side cover.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 77 78

Comments to this Manuals

No comments

CYBEX 610A Service Manual Page 35

Comments to this Manuals

Related products and manuals for Fitness, gymnastics & weight training CYBEX 610A