CYBEX 610A Service Manual download pdf (Page 53)

Arc Trainer

425A Side Handles

Kit No. 425AK015

Installation Instructions

NOTE: This instruction sheet describes how to install

the side handles on the Arc Trainer 425A.

Tools Required

• 7/32” Allen wrench

1. Read and understand all instructions thoroughly

before installing this kit.

2. Verify kit contents. See Figure 1.

A. Left side handle (1), 425A-217

B. Right side handle (1), 425A-218

C. BHSCS .375-16 x .75 blk zinc (8), HS-60531

D. Loctite #242, YA000201

B. Place a drop of loctite (D) on the four new

BHSCS (C). Place another drop of loctite in

the threaded hole where each BHSCS will

be tightened into.

C. Install the left side handle using the four

BHSCS/loctite. Tighten the four BHSCS

securely. NOTE: Install the handle bracket

so that the bend of the handle is toward

the front. Figure 2.

D. Repeat steps 3A through 3C to install the

right side handle.

E. Test the unit to verify proper operation.

Figure 1

Figure 2

3. Install the handles.

A. Using a 7/32” Allen wrench, remove the

outside four Button Head Socket Cap

Screw (BHSCS) securing the left rear leg

to the frame. See Figure 2.

BHSCS/

Loctite

(4)

Left Side

Handle

Loctite

NOTE: The bend of the handle

is toward the front.

Cybex

and the Cybex logo are registered trademarks of Cybex International, Inc.

Arc Trainer

and its mark are registered trademarks of Cybex International, Inc.

10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 • www.cybexinternational.com • [email protected]

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 77 78

Comments to this Manuals

No comments

CYBEX 610A Service Manual Page 53

Comments to this Manuals

Related products and manuals for Fitness, gymnastics & weight training CYBEX 610A