Cybex 11020 Eagle Incline Pull User Manual download pdf (Page 8)

Cybex Owner’s Manual

Assembly

Machine Specifications

Total Weight and Size: Eagle 11020 Incline Pull

Weight Machine Dimensions at Rest Machine Dimensions at Use

644 lbs 47” W x 66” L x 62” H 58” W x 66” L x 62” H

292.11 kg 119.38 cm W x 167.64 cm L x 157.48 H 147.32 cm W x 167.64 cm L x 157.48 H

The dimensions stated in the installation instructions are the recommended minimum dimensions as

set forth by the manufacturer. The actual area for access and passage shall be the responsibility of

the facility and should take into account any required local codes or regulations.

Tools Required

• 7/32” Allen Wrench

• 3/4” Allen wrench

• 9/16” Wrench

• External snap ring pliers

• Phillips screwdriver

• Medium weight automotive engine oil

• Torque Wrench

Assembly Procedure

Two people will be required for this procedure.

Read and understand all instructions thoroughly before assembling this unit. Check all items

carefully. If there is damage, see the Customer Service section of this manual for proper procedure to

return, replace, or reorder parts.

It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate

clearance around each machine to allow for safe use and passage.

Verify parts list shown below

Qty Part Number Description Diagram

4 11090-392 Foot pad

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

No comments

Cybex 11020 Eagle Incline Pull User Manual Page 8