Cybex 625T Treadmill Owner’s Manual
30
Plug the CSAFE cable into the CSAFE coupler on the front of the unit.3.
CSAFE Cable (Red)
Mounting
Plate
CSAFE
Coupler
Install shield.
Using a Philips screwdriver tighten the seven screws securing the shield to the base.1.
Screws
(7)
Shield
Attach the front covers.
Perform steps 1 and 2 if you removed the front cover. If not, skip to step 3.
Locate the front cover and four screws removed on page 24.1.
Front Cover
Screws (4)
Using a Philips screwdriver install, but do not fully tighten the four screws securing the front 2.
cover to the base.
Locate the motor cover.3.
Comments to this Manuals