CYBEX 625T Owner's Manual download pdf (Page 40)

Cybex 625T Treadmill Owner’s Manual

Quick Operation Guide

Maximum user weight is 400 lbs. (181 kg).

The following is a quick overview of the operation of the treadmill. For more information read Detailed

Operation Guide in this chapter.

Place your feet on the two top steps located on each side of the running belt.1.

WARNING: Do not stand on the running belt when starting the treadmill. Always place

your feet on the two top steps when beginning a workout.

Clip the e-stop clip onto your clothing and test it as described under 2. Emergency Stop in the

Safety chapter.

Press the 3. QUICK START key.

The treadmill begins a countdown, “3...2...1,” after which it accelerates the belt to 0.5 mph (0.8 4.

kph) and enters Active Mode.

Hold the handrails while you step onto the running belt and begin walking.5.

Press the 6. Speed + – keys to change the belt speed at any time. The right display will show the

current speed.

Press the 7. Incline ▲▼ keys to change the incline at any time. The left display will show incline.

Press the 8. Stop key at any time to stop the running belt. “Workout Review” is displayed and the

incline returns to 0%.

Detailed Operation Guide

Maximum user weight is 400 lbs. (181 kg).

Plug the treadmill power cord into a power outlet from a grounded, single phase, dedicated 1.

circuit, rated for one of the following:

100 VAC, 50/60 Hz, 20A•

115 VAC, 60 Hz, 20A•

208 VAC, 60 Hz, 15A•

220 VAC, 60 Hz, 15A•

230 VAC, 50 Hz, 13A, UK•

240 VAC, 50 Hz, 15A•

Set the on/off switch to the on position. 2.

WARNING: Do not stand on the running belt when starting the treadmill. Always place

your feet on the two top steps when beginning a workout.

Place your feet on the two top steps located on each side of the running belt.3.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 61 62

No comments

CYBEX 625T Owner's Manual Page 40