CYBEX Juno-Fix User's Guide download pdf (Page 23)

REMOVING THE SEAT COVER

• Once the press-studs on the back of the backrest have been undone, the cover

can be removed by drawing it forwards.

• To remove the seat cushion cover, release both belt straps and also undo the

press-studs on the underside and draw the cover forward.

• The headrest cover can simply be pulled forward to remove it.

• All visible parts of the child seat must be regularly checked for damage. The

mechanical parts must function faultlessly.

• It is essential to make sure that the child seat is not jammed between hard

parts such as the car door, seat rails etc., which can damage it.

• If the child seat is dropped it must be tested by the manufacturer before being

used again.

PRODUCT CARE

CLEANING

Care must be taken that only an Original CYBEX Seat Cover is used, because the

cover is also a fundamental component of the good functioning of the child seat.

Replacement covers may be obtained from a specialist shop.

Note! Please wash the cover before using it for the first time. The cover should be

washed at 30 °C in a delicate wash cycle. Washing it at temperatures higher than 30

°C may result in the colours running. Wash separately from other items and never dry

in the tumble dryer! Never dry in strong sunlight! The plastic parts can be cleaned with

a mild cleaning agent.

To guarantee that your child seat provides the maximum protection, it is essential to

comply with the following points:

The cover consists of three main components for headrest, backrest and seat cushion,

which are secured to the child seat either by velcro, press-studs or elastic bands. Once

you have released all the fastenings, you can remove the individual components for

washing.

To detach the individual components of the cover carry out the following steps:

To replace the cover, carry out the same steps in the reverse order.

WARNING! Never use chemical cleaning or bleaching agents!

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

No comments

CYBEX Juno-Fix User's Guide Page 23