Cybex 751T Treadmill User Manual download pdf (Page 53)

Cybex 751T Treadmill Owner’s Manual Cybex 751T Treadmill Owner’s Manual

52 53

Other Preventive Maintenance

Other preventive maintenance activities must be completed by a qualied service technician at the

recommended intervals listed in the Service Schedule at the end of this chapter. These activities

include:

• Replace the running deck

• Replace the running belt

Elevation Motor Lubrication — In time the elevation motor pivot points may develop a squeak.

Lubricate the upper and lower bolts and the spacers with a small amount of lithium grease. You can

buy lithium grease at an auto parts store.

Static Electricity — Depending upon where you live, you may experience dry air, causing a

common experience of static electricity. This may be especially true in the winter time. You may

notice a static build-up just by walking across a carpet and then touching a metal object. The same

can hold true while working out on your treadmill. You may experience a shock due to the build-

up of static electricity on your body and the discharge path of the treadmill. If you experience this

type of situation, you may want to increase the humidity to a comfortable level through the use of a

humidier.

Service Schedule

All maintenance activities shall be performed by qualied personnel. Failure to do so could result in

serious injury.

This is the minimum recommended service.

Determine mileage.

1. While in Dormant Mode enter Statistics Mode by pressing the sequence CLEAR 999 and

ENTER. The ENTER key is active to advance to the next screen. The SPEED control keys are

also active to move forward or backwards in the menu.

2. Press the SPEED control keys to display “6-SERVICE” and miles or kilometers to the next

required service will be displayed.

3. Record Mileage. Displays the count-down mileage to the next required service. Mileage start

at 15,000 miles (24,140 Km) and counts down to 0.

To exit Statistics Mode, press the CLEAR key .

First 500 miles (800 km).

Check running belt tension and tracking.

Every 5,000 miles (8,000 km).

•

Check running belt tension and tracking.

• Move treadmill and vacuum underneath.

• Raise elevation to 15%, carefully tip treadmill up on the console to clean underneath with a dry

cloth and vacuum. Return to normal position when done.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

No comments

Cybex 751T Treadmill User Manual Page 53