CYBEX 530S Owner's Manual download pdf (Page 16)

Assembly

and Setup

Page 2-2

Cybex 530S Owner’s Manual

WARNING: Use extreme caution when assembling the unit. Failure to do so could result in injury.

WARNING: Always use proper lifting methods when moving heavy items.

Tools Required

• 1/2” Open end wrench

• 5/32” Allen wrench

• 3/16” Allen wrench

• Phillips head screwdriver

NOTE: The words “left” and “right” denote the user’s orientation.

1. Read and understand all instructions thoroughly before assembling the unit.

NOTE: Each step number in the assembly instructions tells you what you will be doing. The lettered

steps following each step number describe the procedure required. Do not continue with step 2

until you have carefully read all of the assembly instructions.

2. Verify you have received the correct package.

A. Read the sticker on the outside of the box and verify that the model number and language is

what you ordered.

3. Unpack and verify the contents of the boxes.

A. Lift up and remove the cardboard sleeve that surrounds the unit.

B. Verify that you have the color that you ordered by looking at the paint.

The power requirements for the unit are a grounded circuit rated for one of the following:

115 VAC ±5%, 50/60 Hz; or 230 VAC ±10%, 50/60 Hz. Contact your electrician to ensure the power

supply complies with local building codes. NOTE: Do not use a ground plug adapter to adapt the

3-prong power cord plug to a non-grounded electrical outlet.

Up to ten units can be daisy-chained together for single outlet use. Use daisy chain power supply cord,

Part# AW-14004. The daisy-chain outlet is rated at 750 Watts.

Assembling the Cybex 530S Stepper

Electrical Power Requirements

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

No comments

CYBEX 530S Owner's Manual Page 16