CYBEX 700T Service Manual download pdf (Page 79)

Active keys during this test (hold keys for two seconds):

START/ENTER will advance you to the next diagnostic test.

STOP will exit and return you to the mode you were in before

entering Diagnostic Tests.

SHIFT backs you up one step in the diagnostics test menu.

The - and + keys change the speed set point.

The v

arrow keys change the elevation set point.

d4: Incline Sensor Test

This test allows you to elevate the treadmill up and down using the v

arrow keys. The

elevation % grade reading flashes in the left control panel window.

This test displays the diagnostic test number d4 and flashes the elevation % grade in the left

control panel window as the correlating elevation encoder value is shown in the right window.

Each % grade is equivalent to 88 counts of the encoder.

For example:

d4 12 972

Active keys during this test (hold keys for two seconds):

START/ENTER will advance you to the next diagnostic test.

STOP will exit and return you to the mode you were in before entering Diagnostics Tests.

SHIFT backs you up one step in the diagnostics test menu.

The v

arrow keys change the elevation up or down.

Also active in this diagnostic is the capability to calibrate the treadmill by pressing the

v key and the + key simultaneously.

d5: LED Test

This test lights up all the LEDs and back-lit messages on the display individually, in sequence.

It allows you to locate any bad LED segments.

For example:

- - - - - - - -

Active keys during this test (hold keys for two seconds):

The - or + keys will light up all the display segments at once.

START/ENTER will advance you to the next diagnostic test.

STOP will exit and return you to the mode you were in before entering Diagnostic Tests.

SHIFT backs you up one step in the diagnostics test menu.

d6: Key Pad Test

The diagnostic test number d6 is displayed in the left control panel window. This test displays

a code number for any key depressed during the test in the right display window. Each key on

the display is represented by a code number 1, 2, 4, 8, 16, 32, 64, counting from left to right.

Cybex 700T Treadmill Owner’s Manual

Page 7-16

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 89 90

No comments

CYBEX 700T Service Manual Page 79