CYBEX AUTOVIEW COMMANDER - User's Guide download pdf (Page 27)

Chapter 3: Basic Operations 21

Chapter 3: Basic Operations

Viewing and Selecting Channels and Servers

Your AutoView may be operated in either a non-secure (no password required) or

secure (password required) mode. All units ship defaulted to the non-secure mode.

For more information on security, see Setting User Station Security in this chapter.

Front panel LEDs and push-buttons

Once the green LED over a channel lights, the attached server can be selected

via the On-Screen Display menu or, if you are in non-secure mode, channel

push-buttons, the Scan button or keyboard hotkey sequence. The amber LED

will light at the active computer.

The Scan push-button has one LED over it. Press the button momentarily to

switch to the next computer in sequence. The LED will turn amber briefly

during the channel switch. Press and hold the button for one second to initiate

channel scanning. The LED will turn green while you are in scan mode.

The status LED lights red if an internal failure occurs. The LED will blink

green for several seconds during power up while the system performs a

self-diagnostic. After initialization, the LED remains green during normal

operation and blinks only when you are in Command Mode.

Figure 3.1: The AutoView Front Panel LEDs and Push-buttons

On-Screen Display

When you launch the on-screen display, you will first see the OSD Administrator

Channel List. This menu lists all the servers in the system, the associated

addresses and the status of each port. From here, you can you can select servers

and access OSD configuration options.

NOTE: The OSD interface colors differ slightly between the AutoView 200 and 400 models.

We have used AutoView 400 screen shots for the User Guide. The few feature differences

are noted in the text.

To access the OSD Administrator Channel List:

1. Press the keyboard Control key twice within one second.

2. In non-secure mode, the Administrator Channel List appears.

-or-

In secure mode, the User Login window appears. Type in your user name

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

No comments

CYBEX AUTOVIEW COMMANDER - User's Guide Page 27