CYBEX AUTOVIEW COMMANDER - User's Guide download pdf (Page 32)

26 AutoView 200/400 Installer/User Guide

Figure 3.5: Edit Channel Menu

4. Type the new channel name, address, ID and scan dwell times.

5. Highlight ID Setup and press Enter. Use the Arrow keys to position the ID

window where you would like it to appear when this channel is selected. Press

Enter. For more information, see Conﬁ guring the ID window in this chapter.

6. Highlight Save Changes and press Enter.

To delete an existing channel:

1. Highlight the channel you wish to delete in the Administrator Channel List.

2. Press the Control key twice. The Administrator Commands menu appears.

-or-

Press the Delete key. (If you press Delete, skip to step 4.)

3. Highlight Delete Channel.

4. Type Y or N at the prompt to conﬁ rm the deletion and press Enter.

Configuring the ID window

The ID window appears when you change channels and displays the name of

the selected channel. This window can be individually configured for each

channel in your system. The characteristics of the ID window can be changed

from the Edit Channel menu. This option is only available if you are operating

in non-secure mode or if you are the system administrator.

To change the size, color and position of the ID window:

1. Highlight the channel you wish to change in the Administrator Channel List.

2. Press the Control key twice.

-or-

Press F3. (If you press F3, skip to step 4.)

Scan Dwell Time 5

Avocent Control Panel

Edit Channel

Name Marketing

Address C

ID Dwell Time 5

ID Setup

Save Changes

ENTER = next ESC = exit

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

No comments

CYBEX AUTOVIEW COMMANDER - User's Guide Page 32