CYBEX 500C Owner's Manual download pdf (Page 16)

If you have the CardioTouch or Polar heart rate monitor option, attach the heart rate

monitor cable to the back of the console. See Figure 2, detail A.

Use the four Phillips-head screws (10) from the configuration kit to attach the display console

to the console back-plate. See Figure 2.

Attach the water bottle holder to the back plate using three screws. Important: if you choose

not to install the water bottle holder, you must still screw the three screws into the open holes

in the back plate to protect the electronics from the environment.

Installing the Optional Polar

Heart Rate Receiver

Remove the plate at the rear of the

cycle (3). Plug the cable, already inside

the seat rail, into the Polar receiver (2).

Loosen the ½" nut (4) on inside of seat

rail, and slide the Polar receiver bracket

onto the bolt (8) shaft. Tighten the nut

to secure the bracket, and replace the

rear plate (3).

Cybex 700C Cycle and 700R Recumbent Owner’s Manual

Figure 3

Page 2-4

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

No comments

CYBEX 500C Owner's Manual Page 16