CYBEX 500C Owner's Manual download pdf (Page 17)

Assembling the 700C Cycle (Upright)

Parts List for the 700C Cycle

Part# Qty Description

LT-03151 1 Owner's Manual

HX-00438 1 Wrench, 3/16 Hex Key

HS-41109 9 #10-24 x 1/2" Screw

HS-41072 4 5/16-18 x 3/4" Button Head Screw

HS-41126 3 5/16-x 1" Button Head Screw

PL-51670 1 Water Bottle Holder

HW-53018 7 5/16" Split Lock Washer

AX-61026 1 Termination Plug

AW-61033 1 Communications Cable

AX-61351 1 Handlebar (no CardioTouch) or

AF-61434 1 Handlebar (for CardioTouch)

AX-61423 1 CardioTouch Handlebar (optional)

AX-70387 1 Display Upright

Varies 1 Configuration Kit

Varies 1 Display Console

Varies 1 Main Chassis Base

Attaching the Display Upright

See Figure 4 (located on the next page) for this step. Lay the display upright on the ground

and plug the ribbon cable from the upright to the ribbon cable in the chassis. Tuck the cables

inside the chassis upright tube to make sure they don't get pinched when you attach the

upright. Slide the upright down over the upright on the chassis. Using a 3/16" hex wrench,

secure them with three 5/16" by 1" button-head screws (HS-41126) and washers (HW-53018).

NOTE: Do not overtighten the screws for attaching the upright tube. The screws should be

tightened only enough to securely attach the upright tube without movement.

Stand up the chassis/display upright combination.

Cybex 700C Cycle and 700R Recumbent Owner’s Manual

Page 2-5

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

No comments

CYBEX 500C Owner's Manual Page 17