CYBEX 610A Service Manual download pdf (Page 56)

Service

Page 4-37

Cybex Arc Trainer 610A Service Manual

7. Attach the console mount.

A. Insert the upper display

cable into the console

mount and place on top of

the base assembly. See

Figure 29.

B. Using a 7/32” Allen

Wrench, attach the four

screws and four lock

washers securing the

console mount in place.

5. Connect the cables.

A. Connect these cables into

the display board: the

display cable; the two

upper switch membrane connectors; the lower switch membrane connector; the contact heart

rate cable and the polar heartrate cable. See Figure 28.

6. Check the connections:

A. Check to see that all of the cables are connected firmly in their proper place.

7. Secure the console back.

A. While being sure not to pinch any cables, use a Phillips head screwdriver to tighten four screws

securing the console front to the console back removed in step 2B.

B. Using a Phillips head screwdriver secure the access cover to the console back with the screw

removed in step 2A.

Figure 29

Upper

Display

Cable

Lower

Display

Cable

Contact Heart

Rate Cables

Console

Assembly

Washers (4)

Screws (4)

Lower Display Cable

Tools Required

• Flat head screwdriver

• Phillips head screwdriver

• 9/16” Open-end wrench or socket wrench

• 3/16” Allen wrench

• Tape

• Wire Cutters

! WARNING: Disconnect the power cord before beginning this procedure. Keep wet items away

from inside parts of the unit. Electrical shock could occur even if the unit is

unplugged.

1. Disconnect the external power source.

A. Turn the main power switch above the power inlet to the off (O) position.

B. Unplug the power cord from the power outlet.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 71 72

Comments to this Manuals

No comments

CYBEX 610A Service Manual Page 56

Comments to this Manuals

Related products and manuals for Fitness, gymnastics & weight training CYBEX 610A