CYBEX Plate Loaded Incline Press Service Manual download pdf (Page 8)

Safety

Page 1-2

Cybex Plate Loaded Owner’s Manual

Facility Safety Precautions

• Read the Owner’s Manual carefully before assembling, servicing or using the equipment.

• Securely anchor each machine to the floor using the anchor holes provided in each

machine.

• Make sure that each machine is set up and operated on a solid level surface. Do not

install equipment on an uneven surface.

• Make sure that all users are properly trained on how to use the equipment.

• Make sure there is enough room for safe access and operation of the equipment.

• Perform regular maintenance checks on the equipment. Also pay close attention to all

areas most susceptible to wear, including (but not limited to) cables, pulleys, belts and

grips.

• Immediately replace worn or damaged components. If unable to immediately replace worn

or damaged components then remove from service until the repair is made.

• Use only Cybex supplied components to maintain/repair the equipment.

• Keep a repair log of all maintenance activities.

• Inspect all cables and belts and connections prior to use. DO NOT use if any components

are worn, frayed, or damaged.

NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular

maintenance is performed.

NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult

with a professional contractor.

NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2

bolts or better).

NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors.

Shim any leg or frame not in contact with surface using flat washers.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 205 206

No comments

CYBEX Plate Loaded Incline Press Service Manual Page 8